When selling products in the EU, it is important to understand which requirements apply to CE marking. A common question is whether you need to CE mark a lampshade when selling it together with a CE-marked lamp cord. Let’s look at what EU legislation says and what you need to consider.
Does a lampshade need CE marking?
A lampshade without electrical components is not normally considered electrical equipment. Therefore, a standalone lampshade is generally not subject to CE marking requirements. If you sell the lampshade separately, without it forming part of a finished electrical product, it will not normally need CE marking. However, other safety requirements still apply, particularly under the General Product Safety Regulation (GPSR). For example, you need to consider whether the lampshade’s materials can withstand the heat generated by the light source it is intended to be used with. Its construction, stability and potential fire risks may also be important.
What if the lampshade is sold with a CE-marked lamp cord?
When selling a lampshade together with a CE-marked lamp cord, the requirements may change depending on how the products are designed, marketed and sold.
If they are sold as a complete lamp or luminaire
If you combine a lampshade and a lamp cord with components such as a lampholder and sell them as a finished lamp or luminaire, you need to assess the complete product. The fact that the lamp cord is already CE marked is not enough. You are responsible for ensuring that the finished product complies with all applicable EU requirements.
For a typical mains-powered luminaire, the Low Voltage Directive (2014/35/EU) may apply. Other legislation may also need to be considered, depending on the product’s characteristics. If the complete product is subject to CE marking requirements, you must carry out the appropriate conformity assessment, prepare the necessary technical documentation and draw up an EU Declaration of Conformity before affixing the CE marking.
If they are sold as separate components
If the lampshade and lamp cord are sold separately, they may be assessed as individual products. In this case, a typical standalone lampshade will not normally require CE marking. However, the way the products are sold is not the only deciding factor. If they are marketed and supplied as a complete lighting solution, requirements may still apply to the combination. The lampshade must also be safe for its intended use. For example, it must not create a fire hazard by being positioned too close to a hot light source.
What about product safety requirements?
Even if a standalone lampshade does not normally need CE marking, it must still be safe to use. For consumer products, the General Product Safety Regulation (EU) 2023/988 is particularly important. It has applied since 13 December 2024.
For a lampshade, this means that:
- The product must be safe under normal and reasonably foreseeable conditions of use.
- Customers must receive any necessary safety information and warnings.
- The materials and construction must be suitable for the intended use.
- The lampshade must not create unacceptable risks when used with the electrical equipment it is intended for.
Where a finished lamp is covered by specific EU product legislation, that legislation takes priority for the risks it addresses. The GPSR may provide additional requirements for risks not already covered. It is therefore important to distinguish between CE marking and product safety. A product may still need to meet safety requirements even if it does not require CE marking.
Summary: Do you need to CE mark a lampshade?
No, a typical standalone lampshade without electrical components does not normally need CE marking. Yes, the complete product may need CE marking if the lampshade is sold with electrical components as a finished lamp or luminaire. A typical mains-powered luminaire is normally subject to CE marking requirements, but the exact assessment depends on its design and the applicable legislation. The key is to assess what you are actually selling and which safety requirements apply to the product as a whole.
Want to learn more about CE marking for lamps?
Are you planning to sell lamps or luminaires and want to understand which requirements apply? Certify & Comply offers training to help you understand the basics of CE marking for lamps and how to work with product requirements.
Explore our CE marking training courses and take the next step towards selling your products safely. Need personal assistance with CE marking or technical documentation? Learn more about our services or contact us to discuss your product.
You can also read more about CE marking and EU product requirements on the European Commission’s website.





